Wireless Radios for Water and Wastewater Applications
Industrial wireless | Wells, tanks, pump stations, reservoirs, and remote sites
✓ What problem are we solving?
Water and wastewater systems depend on remote equipment that may be difficult or expensive to cable. Pump status, tank levels, flow rates, gates, reservoirs, and intrusion alarms all need reliable communication.
Britton Electronics & Automation designs wireless communication around the utility application, site conditions, data requirements, and long-term support needs.
Remote site connectivity
Wireless links can connect wells, tanks, pump stations, and other distributed assets.
Lower installation disruption
Wireless can avoid trenching or cable runs where they are impractical.
Better operational awareness
Remote data supports control, alarming, and SCADA visibility.
✓ What technology supports the solution?
ESTeem industrial wireless radios can support water and wastewater monitoring and control when the network is planned around distance, bandwidth, antennas, power, and environment.
✓ Define what data must move between sites.
✓ Evaluate distance, obstructions, antenna locations, and power.
✓ Integrate wireless data into PLC, RTU, or SCADA systems.
✓ How is the solution implemented?
BEA can help evaluate wireless feasibility, install the radio network, and support integration with the control system used by operators and maintenance teams.
Supporting resource: ESTeem water and wastewater wireless article.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation, instrumentation, networking, and electrical improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
Water and Wastewater Instrumentation Lunch and Learn
Training | Flow, analytical measurement, radar level, and connected plant technology
✓ What problem are we solving?
Water and wastewater teams need reliable measurement and practical understanding of new instrumentation technologies. Without that knowledge, facilities can miss opportunities to improve control, maintenance, and process visibility.
Britton Electronics & Automation hosts technical training with trusted manufacturers so customers can learn how measurement technology applies to real utility and industrial applications.
Practical education
Training connects new instrumentation features to real field and plant problems.
Better technology selection
Teams can compare measurement approaches before committing to a project.
Improved support
Shared understanding makes startup, troubleshooting, and maintenance easier.
✓ What technology supports the solution?
This BEA and Endress+Hauser event covered flowmeter technology in the connected plant, Memosens analytical sensors, advanced aeration control, nutrient analyzers, turbidity, radar level, FMR20, and Heartbeat Technology.
✓ Apply measurement technology to water and wastewater applications.
✓ Review analytical sensors and level measurement options.
✓ Use training to improve project planning and maintenance outcomes.
✓ How is the solution implemented?
BEA can help customers evaluate instrumentation, integrate measurement data into control systems, and continue supporting the system after installation.
Supporting resource: Endress+Hauser instrumentation resources.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation, instrumentation, networking, and electrical improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
Data Monitoring for Industrial Equipment Visibility
Monitoring | Equipment status, remote data, and maintenance insight
✓ What problem are we solving?
Industrial teams often need better visibility into equipment status, alarms, and operating conditions across distributed assets. Without reliable monitoring, small issues can become emergency maintenance events.
Britton Electronics & Automation helps customers turn equipment data into useful monitoring workflows that support operations, maintenance, and long-term reliability.
Improved visibility
Monitoring helps teams see equipment condition and operating status before problems escalate.
Faster response
Useful alerts and data points reduce time spent finding the source of a problem.
Better planning
Trend information supports maintenance scheduling and equipment decisions.
✓ What technology supports the solution?
Industrial data monitoring may use sensors, gateways, controls, dashboards, and communication networks. BEA focuses on selecting and integrating the technology around the customer's operating problem.
✓ Identify the equipment and data points that matter.
✓ Connect monitoring data into a usable control or reporting system.
✓ Document alarms, thresholds, and maintenance response expectations.
✓ How is the solution implemented?
BEA can help review monitoring goals, integrate field data, and support the controls or network infrastructure needed to make that information dependable.
Supporting resource: Hubbell data monitoring video.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation, instrumentation, networking, and electrical improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
Arc Flash Awareness for Industrial Electrical Work
Electrical safety | Arc flash risk, panel work, and maintenance planning
✓ What problem are we solving?
Electrical panels and power distribution equipment can expose qualified workers to arc flash hazards when maintenance or troubleshooting is not planned correctly. Production pressure, poor documentation, and unclear equipment status can all increase risk.
Britton Electronics & Automation helps customers approach electrical work with practical safety planning, clearer panel documentation, and maintenance practices that reduce unnecessary exposure.
Safer maintenance planning
Arc flash awareness helps teams decide when work should be de-energized, planned, or escalated.
Better documentation
Clear panel labels and equipment information support safer troubleshooting decisions.
Reduced exposure
Designing panels for maintainability can reduce the need for risky energized interaction.
✓ What technology supports the solution?
Arc flash safety depends on proper electrical design, documented procedures, labeling, PPE practices, and trained personnel. BEA supports the controls and panel work that fits into that safety process.
✓ Review panel access, labels, and electrical documentation.
✓ Support safer troubleshooting and maintenance workflows.
✓ Coordinate controls work with facility electrical safety procedures.
✓ How is the solution implemented?
BEA can help improve panel documentation, modernize controls, and design maintenance-friendly electrical interfaces that support safer work practices.
Supporting resource: LinkedIn arc flash safety post.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation, instrumentation, networking, and electrical improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
Planning the Right Industrial Wireless Network
Industrial wireless | Remote assets, plant communications, and network design
✓ What problem are we solving?
Industrial wireless networks are often asked to connect remote equipment, moving assets, water and wastewater sites, or plant areas where cable is expensive or impractical. Reliability suffers when the project starts with hardware instead of application requirements.
Britton Electronics & Automation designs wireless networks around the communication problem: what must be connected, how much data must move, how often it must update, and what environmental conditions the system must survive.
Application-fit design
The wireless architecture is selected around distance, data needs, site conditions, and support requirements.
Reduced installation cost
Wireless can avoid difficult trenching or cabling when designed correctly.
Long-term reliability
Documented network design makes support and expansion easier.
✓ What technology supports the solution?
ESTeem industrial wireless systems can support remote monitoring and industrial communications when the radio network is designed around the site and application.
✓ Define what equipment needs to communicate and why.
✓ Review distance, bandwidth, update rate, and environmental constraints.
✓ Plan antennas, mounting, power, grounding, and support access.
✓ How is the solution implemented?
BEA can help customers evaluate wireless feasibility, design the network, integrate data into PLC or SCADA systems, and support the installation after commissioning.
Supporting resource: ESTeem industrial wireless planning presentation.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation and reliability improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
Industrial Wireless Antenna Planning for Reliable Communications
Industrial wireless | Antennas, frequency planning, and network reliability
✓ What problem are we solving?
Wireless projects can fail when antenna selection, path planning, mounting, and environmental conditions are treated casually. A radio may be capable, but the network still depends on the physical wireless design.
Britton Electronics & Automation treats industrial wireless as an engineered communication system. Antenna choice, cable length, line of sight, frequency, grounding, and installation details all affect reliability.
More reliable links
Proper antenna planning improves signal quality and reduces intermittent communication problems.
Cleaner installation
Correct mounting, cabling, and grounding reduce maintenance issues.
Better supportability
Documented wireless design makes troubleshooting easier when conditions change.
✓ What technology supports the solution?
ESTeem industrial wireless resources can help explain antenna and wireless network fundamentals. BEA applies those concepts to real plant, utility, and remote-site communication projects.
✓ Review distance, line of sight, obstructions, and mounting locations.
✓ Select antenna type, cable, and grounding practices for the environment.
✓ Document the wireless path and installation details.
✓ How is the solution implemented?
BEA can review a wireless application, recommend a practical antenna approach, install the communication hardware, and support the network after startup.
Supporting resource: ESTeem antenna planning presentation.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation and reliability improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.
PowerFlex 527 Drives for Integrated Motion and Motor Control
Motor control | Integrated drives, automation platforms, and commissioning
✓ What problem are we solving?
Applications that need coordinated motor control require more than a drive mounted in a panel. They need correct sizing, network integration, safety consideration, diagnostics, and commissioning support.
Britton Electronics & Automation integrates drive technology into complete automation systems so motor control, PLC logic, operator interface, and maintenance diagnostics work together.
Tighter automation integration
Integrated drive platforms can simplify control and diagnostics inside compatible automation systems.
Improved commissioning
Planned configuration and testing reduce startup issues.
Better long-term support
Documented drive setup helps maintenance teams troubleshoot and replace components later.
✓ What technology supports the solution?
Allen-Bradley PowerFlex 527 drives can support integrated motor control applications when paired with the right control platform and engineering workflow.
✓ Match the drive platform to the control architecture.
✓ Configure communications, safety, and diagnostics intentionally.
✓ Commission the drive as part of the complete machine or process system.
✓ How is the solution implemented?
BEA can support drive selection, panel design, programming, startup, and documentation for applications using Rockwell Automation drive platforms.
Supporting resource: PowerFlex 527 video.
Need help applying this technology in your facility?
Britton Electronics & Automation helps industrial customers evaluate, integrate, commission, and support practical automation and reliability improvements.
Call BEA to discuss your industrial controls, instrumentation, networking, or maintenance support needs.